Generating Waveforms on Agilent MXG, ESG, PSG Signal Sources using MATLAB (Scripts) Publisher's description
from Vinod Cherian
MATLAB is a software environment and programming language with over 1,000,000 users and is used to generate arbitrary and standard waveforms
MATLAB is a software environment and programming language with over 1,000,000 users and is used to generate arbitrary and standard waveforms, configure and control instruments, build automated test applications, and analyze and visualize data from other instruments. MATLAB only supports instrument communication when you use MATLAB with its Instrument Control Toolboxв„ў.
This example uses MATLAB to generate an arbitrary waveform (IQ data), configure the instrument, download the waveform to the Agilent source, and instruct the instrument when to source the waveform.
To execute this example, type вЂ?Generate_Waveform_AgilentвЂ™ in the MATLAB command window. [Note: Change the IP address in the generate_agilent_waveform.m file to the IP address of the signal source.]
This MATLAB example has been tested on an N5182A MXG but should work on other Agilent signal sources including these MXG, ESG, and PSG models: E4428C,E4438C,N5181A,N5182A,N5183A,E8241A,E8244A,E8251A,E8254A,E8247C,E8257C, E8267C,E8257D,E8267D,E8663B,N8211A,N8212A.
To learn more about using MATLAB and Instrument Control Toolboxв„ў for configuring and controlling instruments, visit:
To request a trial of MATLAB and/or Instrument Control Toolbox, visit http://www.mathworks.com/agilent/instrument/tryit.html
For additional information on using MATLAB with Agilent instruments, including MATLAB examples, demos, drivers, and videos, visit:
System Requirements:MATLAB 7.8 (R2009a)
Program Release Status: New Release
Program Install Support: Install and Uninstall