Archos 5,7 Firmware 22.214.171.124 Publisher's description
Archos 5,7 Firmware 126.96.36.199
How to install a firmware. Firmware is another name for Operating System (OS) or System Software. Below, you will find the instructions and the latest software to update your specific ARCHOS device. You do not have to install all the updates, only the most recent one. Each update takes into account all the previous updates unless specified otherwise.
Gen 5 Wifi Devices:
If you have an Archos WiFi device connected to the Internet, you can update your device directly by going to menu>Firmware & Plug-ins>Online Firmware Update. Press OK and then follow the on-screen instructions.
Step 1. Download the firmware to your computer
When you download the update file, your browser may warn you that the file 'could be harmful'. This is normal because browsers are not familiar with files that have a .AOS extension and suspect that they could be malicious. These files are not harmful to your computer.
Step 2. Turn on your ARCHOS device and connect it to your computer with the USB cable
Step 3. Wait a few seconds for device detection
Step 4. Copy and paste the downloaded firmware (.AOS file) to the "root" of your ARCHOS device.
Case 1: Your Archos is detected by your computer as a Hard Drive ( E: for example ) in Windows Explorer. Paste the update file directly onto the ARCHOS hard drive icon.Case 2: Your Archos device is detected as a Device in Windows Explorer (not as a hard drive) and you see just two folders Data and Media when you open it. Paste the update file into the folder called Data.Case 3. Your Archos device is detected as a Device in Windows Explorer (not as a hard drive) and you see Internal Hard Drive when you open it. Open this Internal Hard Drive icon and you will see the various Archos folders inside (Video, Music, etc.). Paste the update file into this area but be careful not to paste it into any of the folders there.
Step 5. Disconnect the Device
Unplug the USB cable (Windows Device connections) or use the "safe disconnect" green arrow icon (Hard drive connection) in the system tray before unplugging the USB cable.
Step 6. On your ARCHOS device, click on "Update Firmware"
Generation 5 products: Once you disconnect the USB cable, the device will recognize the new update file and invite you to install it. Follow the on-screen instructions. If it does not suggest an update, this means that the .AOS file did not get placed on the ???Root??? of the device.
Generation 4 products: From the main ARCHOS screen, click on the "tab" button to show the settings screen. Select the System icon and then click on the Update Firmware button.
Other products: Go to the settings and open the icon System where you can find the Update Firmware button.
Note: In all cases, your new .aos file must not be in a folder within the Archos device. The ARCHOS expects to find the update file on the root of the device. You can verify this by using the file browser on the device.
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.