Free Dell OptiPlex L60 System BIOS A02 1.0 Driver Download - Downloadplex.com

Dell OptiPlex L60 System BIOS A02 Publisher's description:

from Dell

Dell OptiPlex L60 System BIOS A02

Level of Importance: Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Fixes and Enhancements
The following changes have been made to the A00 BIOS to create A02:

1. PET is now sent when no boot device is available.

2. False PET will not be sent when system takes longer than 3 seconds to boot.

3. Mouse cursor no longer moves when USB mouse is disconnected.

4. Module bay devices are no longer detected when module bay setup option is
set to OFF.

5. The SHIFT key status is now cleared when the USB keyboard is removed.

6. USB devices are now correctly detected during POST following a power
button 4 second override event.

7. System will now boot from USB device after pressing F12 during POST and
selecting USB device even if there are dormant devices in the boot list.

8. Video BIOS code was updated to version 2759.

Installation Instructions

Important Information

* The Floppy Format is recommended for most users. Floppy format creates a bootable self-extracting disk.

* The Non-packaged Format is intended for advanced users that only require the bootable disk.

Installation Instructions

Floppy Format

Creating the disk:

This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.

1. Click Download now from the Download and install section, to begin.
The File Download window appears.

2. Click Save this program to disk.

3. In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.

4. When the file download is complete, click Close button.
Close all open windows.

5. Double-click the down loaded file SX260A02.EXE on your Desktop.
If the Security Warning window appears, click Yes.

6. Click the Setup button.
A black MS-DOS window appears.

7. Press the <Enter> key.

8. Insert a formatted floppy disk in the floppy disk drive and press the <Enter> key.

9. Press the <Y> key to begin copying files.
The message End of the disk set appears.

10. Press the <Enter> key.

11. Click the Start button,

12. Click the Run button.

13. Type a: in the Open box and click OK.
A list of files on the floppy disk appears.

14. Close all open windows and leave the disk in the floppy drive.

Skip to the section Flashing the BIOS below.

If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.

Non-Packaged Format

Creating the disk:

This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.

1. Click Download now from the Download and install section, to begin.
The File Download window appears.

2. Click Save this program to disk.

3. In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.

4. When the file download is complete, click Close button.
Close all open windows.

5. Insert a blank, bootable, formatted 3.5-inch floppy disk.

6. Right-click the downloaded file, point to Send Tothen click to select 3 1/2 Floppy (a), and skip to the section Flashing the BIOS below.

Flashing the BIOS

NOTICE:

Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the
original version of the BIOS.

1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power.

2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive.

3. Click the Start button, click Shut Down, click
Restart, then click OK.

The computer will restart and boot to the floppy disk.

NOTE:

If the flash BIOS program does not
start, and you see only an A:\ prompt, refer to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS. Example: 8100_A09.EXE for BIOS version A09.

The message Press any key to continue appears.
4. Press the <Enter> key.
The message Press "Y" to replace old
BIOS with new BIOS appears.

5. Press the <Y> key.

NOTICE:

Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.

When the BIOS flash is complete, the message Flash program successful. Press any key to reboot appears.
6. Remove the floppy disk and press the <Enter> key.

The computer will now restart with the new revision of the BIOS installed.

Floppy Disk Boot to Disk for BR56978.exe

Download

1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Hard Drive Floppy Disk Creation

1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.

Install

1. Insert the first (or the only) disk of the set into the Floppy drive.
2. Click Start, click Shutdown, click Restart, and then click OK. Windows XP Users need only click restart.
3. Follow the on-screen instructions.

Hard Drive Installation (via WinZip) with Setup.exe File for R56978.exe

Download

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled R56978.exe.
2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\r56978. Write down this path so the executable (I.e.Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\r56978 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
You can free download Dell OptiPlex L60 System BIOS A02 1.0 now.

System Requirements:

No special requirements.

- Download Dell OptiPlex L60 System BIOS A02 1.0 free