Free Dell OptiPlex 740 System BIOS 1.2.3 1.0 Driver Download - Downloadplex.com

Dell OptiPlex 740 System BIOS 1.2.3 Publisher's description:

from Dell

Dell OptiPlex 740 System BIOS 1.2.3

Level of Importance: Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Installation Instructions

Important Information

* The Floppy Format is recommended for most users. Floppy format creates a bootable self-extracting disk.

* The Non-packaged Format is intended for advanced users that only require the bootable disk.

Installation Instructions

Floppy Format

Creating the disk:

This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.

1. Click Download now from the Download and install section, to begin.
The File Download window appears.

2. Click Save this program to disk.

3. In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.

4. When the file download is complete, click Close button.
Close all open windows.

5. Double-click the down loaded file O740-123.EXE on your Desktop.
If the Security Warning window appears, click Yes.

6. Click the Setup button.
A black MS-DOS window appears.

7. Press the key.

8. Insert a formatted floppy disk in the floppy disk drive and press the key.

9. Press the key to begin copying files.
The message End of the disk set appears.

10. Press the key.

11. Click the Start button,

12. Click the Run button.

13. Type a: in
the Open box and click OK.
A list of files on the floppy disk appears.

14. Close all open windows and leave the disk in the floppy drive.

Skip to the section Flashing the BIOS below.

If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.

Return to Top

Non-Packaged Format

Creating the disk:

This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.

1. Click Download now from the Download and install section, to begin.
The File Download window appears.

2. Click Save this program to disk.

3. In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.

4. When the file download is complete, click Close button.
Close all open windows.

5. Insert a blank, bootable, formatted 3.5-inch floppy disk.

6. Right-click the downloaded file, point to Send Tothen click to select 3 1/2 Floppy (a), and skip to the section Flashing the BIOS below.

Flashing the BIOS

NOTICE:

Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS.

1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power.

2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive.

3. Click the Start button, click Shut Down, click
Restart, then click OK.

The computer will restart and boot to the floppy disk.

NOTE:

If the flash BIOS program does not
start, and you see only an A:\ prompt, refer to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS. Example: 8100_A09.EXE for BIOS version A09.

The message Press any key to continue appears.
4. Press the key.
The message Press "Y" to replace old
BIOS with new BIOS appears.

5. Press the key.

NOTICE:

Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.

When the BIOS flash is complete, the message Flash program successful. Press any key to reboot appears.
6. Remove the floppy disk and press the key.

The computer will now restart with the new revision of the BIOS installed.

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
You can free download Dell OptiPlex 740 System BIOS 1.2.3 1.0 now.

System Requirements:

No special requirements.

- Download Dell OptiPlex 740 System BIOS 1.2.3 1.0 free