Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
It is highly recommended to always use the most recent driver version available.rnDo not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
What's New in This Release:
Updates microcodes for FC-PGA package CPU.
No longer displays 'E' nor 'B' for Katmai and Coppermine for processors of frequencies higher than 600MHz.
Shows suffix 'A' only for Coppermine128K 533MHz.
No longer displays 'B' or 'E' for Coppermine/128K (Celeron) CPU.
Displays 800 for Coppermine 800/100 instead of 800E.
Fixes 900MHz (100x9) CPU displayed as 901Mhz.
Updates BIOS flashing utility.
[Note] Please follow steps below to flash this new type BIOS of MX6B EZ motherboards.Procedure:
Download this zipped file.
Run shareware PKUNZIP (http://www.pkware.com/) which supports miscellaneous operation systems to extract the binary BIOS file and the flash utility. Or Winzip (http://www.winzip.com/) in Windows environment.
Save "6BEZ103.EXE" and "6BEZ103.BIN" to a DOS floppy disk.
Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible.
If you have an EPROM writer, simply take the .BIN file to program your BIOS.
Execute A:>6BEZ103 and the program will do the rest of it. DO NOT turn off power during flashing process, until you are asked to!!
Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done!