Aopen AX3L Bios 1.10 Publisher's description
Aopen AX3L Bios 1.10
CPU: Socket 370
Support Intel Pentium III, Celeron, VIA C3 CPU
Chipset: Intel 440LX
Main Memory : SDRAM DIMM
EDO DRAM or SDRAM
Max Memory : 384MB
Super I/O: Winbond
Clock Gen.: Cypress
Graphics: AGP slot
IDE: Integrated DMA33 Controller
Max Disk : 32GB [26 bits BIOS Spec.]
Audio: ESS Solo 1 PCI sound on-board
USB: USB 1.1 Port x 1
Storage & Back Panel I/O: IDE Channel : DMA33
Floppy Drive Connector : Floppy Drive Connector x 1
PS/2 Keyboard : x 1
PS/2 Mouse : x 1
Printer Port : Printer Port x 1
COM Port : COM Port x 1
USB Port : USB Port x 1
Game/MIDI Port : x 1
Line_In : x 1
Speaker_Out : x 1
MIC_In : x 1
On Board Connector: CPU FAN
Front Panel Connector : Front Panel
BIOS: Award PnP 2Mb Flash ROM BIOS
Form Factor: ATX
Board Size: 305 mm x 244 mm
Software & Utility: HWMON utility
Accessory: Floppy Disk cable
40-wire IDE cable
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
What's New in This Release:Adds "Boot From LAN First" in BIOS Feature Setup.
Fixes Panasonic JU-811 jumper ZIP boot problem with it set as "DRIVE A".
Be able to disable onboard FDC to release IRQ6 if both A: and B: are set to "None".
Fixes MS PS/2 KB compatibility problem with Winbond 977ATF/TF/EF.
Supports AGP display in bootblock.
Supports PC_98 in DMI.
Supports Wake_On_Ring in S4.
Fixes Problem Device (in system info) error in Win98 ACPI mode.
Fixes hang-up problem in NT5.0.
"Y2K CMOS Update" set to "Enabled" by default.
Better compatibility with software wavetable for the onboard sound chip.