Aopen AK72 Bios R1.00 Publisher's description
Aopen AK72 Bios R1.00
CPU: FSB 200MHz
Support AMD Slot A Athlon CPU
Chipset: VIA KX133
Main Memory : 8/16/32/64/128/256/512MB
Max Memory : 1.5GB
Super I/O: Integrated in Chipset
Clock Gen.: Cypress
Graphics: 4X AGP slot
IDE: Integrated ATA66 Controller
Max Disk : 137GB [28 bits ATA Spec.]
Audio: Analog Devices AC'97 Audio CODEC on-board
USB: USB 1.1 Port x 1
Storage & Back Panel I/O: IDE Channel : ATA66
Floppy Drive Connector : Floppy Drive Connector x 1
PS/2 Keyboard : x 1
PS/2 Mouse : x 1
Printer Port : Printer Port x 1
COM Port : COM Port x 1
USB Port : USB Port x 1
Game/MIDI Port : x 1
Line_In : x 1
Speaker_Out : x 1
MIC_In : x 1
On Board Connector: CPU FAN
Front Panel Connector : Front Panel
CD_IN Connector : CD_IN
BIOS: Award PnP 2Mb Flash ROM BIOS
Form Factor: ATX
Board Size: 305 mm x 244 mm
Software & Utility: HWMON utility
Online eBook Manual
Accessory: Bonus Pack CD disc
Floppy Disk cable
40-wire IDE cable
Easy Installation Guide x 1
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
What's New in This Release:Initial release
Note: Please take following steps below to flash BIOS of AK72 motherboards.
Download this zipped file.
Run shareware PKUNZIP (http://www.pkware.com/) which supportsmiscellaneous operation systems to extract the binary BIOS file andthe flash utility. Or Winzip (http://www.winzip.com/) in Windows environment.
Save "AK72100.EXE" and "AK72100.BIN" to a DOS floppy disk.
Reboot your system with this disk without loading any memory handler (such as EMM386) or device driver to get as much free space as possible.If you have an EPROM writer, simply take the .BIN file to program your BIOS.
Execute A:>AK72100 and the program will do the rest of it. DO NOT turn off power during flashing process, until you are asked to!!
Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT",then SAVE and EXIT. Done!