Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
It is highly recommended to always use the most recent driver version available.rnDo not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.rn
What's New in This Release:
Support Athlon XP 2400+, 2600+ CPU. Please be noted that Athlon XP 2400+ and 2600+ CPU need AMD certified heatsink; otherwise, the system will be quite unstable or even fail to boot up. Please check AMD recommended CPU cooler in the following URL. http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
Provide CPU multiplier up to 22X in SoftMenu.
Enhance DDR333 stability while "Enhance DRAM Performance" enabled.
Fix LAN transfer error in 72 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.
Support AMD new coming 333 CPU.
In case over clock the CPU frequency higher than 180MHz, don't press reset button otherwise the system will refuse to boot up. It's a auto protect mechanism to prevent possible hardware damage caused by abnormal working environment.
HPT 372 BIOS Version 2.32. The RAID function is for KD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
BIOS compile date: 9/9/2002.