Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
What's New in This Release:
Added hot key wording to enter BIOS setup when full screen logo enabled.
Changed the option wording from "OnChip SATA" to "OnChip SATA RAID" for "Bootable Add-in Device".
Changed the default setting of "OnBoard IR Port" to "Disabled".
Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status.
Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
Enhanced the system stability when over clocks the CPU FSB over 255MHz with CPU:DRAM = 1:1 setting.
Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table.
Included new Intel CSA LAN boot agent v1.21.07 for 82547EI chip (for IC7-G only).
Displayed correct specification of DDR200 memory module during POST.
Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable.
Updated CPU micro code (0F24H/1EH, 0F25H/15H, 0F27H/37H, 0F29H/17H).
Revised display wording of "Time Alarm" menu box in BIOS setup.
BIOS Compile Date: 8/21/2003.